Keihin 38770-K26-911 ECU help?
-
- Posts: 15
- Joined: Mon Jul 21, 2014 1:41 am
Keihin 38770-K26-911 ECU help?
Hello, I'm working on a 2014 honda 125 engine ecu, looking to see what can be done to recover the firmware on the ecu, I have the ecu depotted, and in working order, looking for some help on locating serial interface, and what tools/software ill need to brute force the password?
You do not have the required permissions to view the files attached to this post.
Last edited by FooKKen on Wed Jul 23, 2014 7:48 pm, edited 1 time in total.
-
- Posts: 15
- Joined: Mon Jul 21, 2014 1:41 am
Re: Keihin 38770-K26-911 ECU help?
Got the datasheet, no debug pins, but I located the serial rx/tx pins, what type of serial interface should I try? I have a few arduino mega's and a couple serial to usb adapters?
-
- Posts: 15
- Joined: Mon Jul 21, 2014 1:41 am
Re: Keihin 38770-K26-911 ECU help?
rxd0 and txd0 dont look like they go to the breakout pads, might it be rxd2 and txd2?
-
- Posts: 15
- Joined: Mon Jul 21, 2014 1:41 am
Re: Keihin 38770-K26-911 ECU help?
Security looks to be a password, no erase on connection according to worry about.
Boot mode still eludes me.
Boot mode still eludes me.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 15
- Joined: Mon Jul 21, 2014 1:41 am
Re: Keihin 38770-K26-911 ECU help?
I have some high power servers on tap for brute forcing. and all the time it takes to do so. yes the mode pin is pulled to +5v when powered on. the model is the msx125.
I can get 10 of these ecu's easy, lots of guys are running the bazzaz z-fi ecu, and there is a surplus of stock ones.
Where to from here? If you want, I can give a donation for the help, I really want inside this ecu...
I can get 10 of these ecu's easy, lots of guys are running the bazzaz z-fi ecu, and there is a surplus of stock ones.
Where to from here? If you want, I can give a donation for the help, I really want inside this ecu...
-
- Posts: 15
- Joined: Mon Jul 21, 2014 1:41 am
Re: Keihin 38770-K26-911 ECU help?
Whats your email addy
-
- Site Admin
- Posts: 48
- Joined: Wed Feb 13, 2013 7:35 pm
Re: Keihin 38770-K26-911 ECU help?
Hi FooKKen,
the last few weeks i am working on the PGM-FI ecus also. I have developed a tool that reads the maps from that ECUs and I already have maps from CBR600RR both normal and HRC ecus. I strongly believe that my tool will work on your ECU also.
At the same time i add support for that ECUs in my tuning suite,
Regards
[attachment=0]Honda Tuning Suite Watermark.png[/attachment]
the last few weeks i am working on the PGM-FI ecus also. I have developed a tool that reads the maps from that ECUs and I already have maps from CBR600RR both normal and HRC ecus. I strongly believe that my tool will work on your ECU also.
At the same time i add support for that ECUs in my tuning suite,
Regards
[attachment=0]Honda Tuning Suite Watermark.png[/attachment]
You do not have the required permissions to view the files attached to this post.
-
- Site Admin
- Posts: 48
- Joined: Wed Feb 13, 2013 7:35 pm
-
- Posts: 15
- Joined: Mon Jul 21, 2014 1:41 am
Re: Keihin 38770-K26-911 ECU help?
Your the man! thanks so much for taking time to help me!
-
- Posts: 2
- Joined: Mon Sep 23, 2013 5:43 pm
Re: Keihin 38770-K26-911 ECU help?
Could I purchase your honda tuning suite. We race 07 and newer 600rr. Thank you. Jake fife. Jakefife@live.com