Kawasaki Ninja250R 2011
-
- Posts: 18
- Joined: Sat Nov 09, 2013 12:22 pm
Kawasaki Ninja250R 2011
2011 Japan model
You do not have the required permissions to view the files attached to this post.
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Ninja250R 2011
Hi excelent!
Ironpony you have pinout?
same EX300?
I made xdf soon
Ironpony you have pinout?
same EX300?
I made xdf soon
-
- Posts: 18
- Joined: Sat Nov 09, 2013 12:22 pm
Re: Kawasaki Ninja250R 2011
Read via AUD port.
Write pinout don't know yet.
Anyone have write pinout?
Write pinout don't know yet.
Anyone have write pinout?
You do not have the required permissions to view the files attached to this post.
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Ninja250R 2011
No, sorry. Soon I get the pinout of the EX300 because I buy a Flash Tune interface with this cable. I can not say whether they are equal (EX250 / EX300).
But I'm identify ECU pin and you can check those who do not have identification with resistance to ground.
16 / 21 / 25
But I'm identify ECU pin and you can check those who do not have identification with resistance to ground.
16 / 21 / 25
You do not have the required permissions to view the files attached to this post.
-
- Posts: 18
- Joined: Sat Nov 09, 2013 12:22 pm
Re: Kawasaki Ninja250R 2011
Resistance btween Ground(pin26) to
pin16 11.3k
pin21 3.2k
pin25 11.0k
pin16 11.3k
pin21 3.2k
pin25 11.0k
-
- Posts: 18
- Joined: Sat Nov 09, 2013 12:22 pm
Re: Kawasaki Ninja250R 2011
Interceptor wrote:
> No, sorry. Soon I get the pinout of the EX300 because I buy a Flash Tune
> interface with this cable. I can not say whether they are equal (EX250 /
> EX300).
> But I'm identify ECU pin and you can check those who do not have
> identification with resistance to ground.
> 16 / 21 / 25
Did you know the flash pinout?
RXD TXD MOD FWE etc...?
> No, sorry. Soon I get the pinout of the EX300 because I buy a Flash Tune
> interface with this cable. I can not say whether they are equal (EX250 /
> EX300).
> But I'm identify ECU pin and you can check those who do not have
> identification with resistance to ground.
> 16 / 21 / 25
Did you know the flash pinout?
RXD TXD MOD FWE etc...?
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Ninja250R 2011
ironpony hold on a little longer. I asked for a help Tipi65 on identification through resistors
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Ninja250R 2011
Pin out
pin16 11.3k - TX
pin21 3.2k - ?
pin25 11.0k - FWE
pin16 11.3k - TX
pin21 3.2k - ?
pin25 11.0k - FWE
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Ninja250R 2011
ironpony other pin identification
please, see ohms for
41 -
38 -
please, see ohms for
41 -
38 -
You do not have the required permissions to view the files attached to this post.
-
- Posts: 18
- Joined: Sat Nov 09, 2013 12:22 pm
Re: Kawasaki Ninja250R 2011
pin42 0.4k
pin38 5.2k
pin38 5.2k
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Ninja250R 2011
I'm taking as a basis for the values that we Hayabusa SH7052. The TX and FWE is the same, but the RX is 10.37 K. Also lack Reset (2.4 K). The MD pin may not even exist. But see also the resistance to 5V pin (Pin 8) - RX = 10K
I bought the EX300 cable Woolich and we can have a basis upon arrival.
I bought the EX300 cable Woolich and we can have a basis upon arrival.
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Ninja250R 2011
See
You do not have the required permissions to view the files attached to this post.