This is the first edition of the "PVTech ECU Management" software.
This edition supports some Yamaha bike models such as:
CryptonX 135
XT660
TMAX500(XP500)
TMAX530(XP530)
Raptor700
MT03
R125
and the list keeps exteding while we research other models.
The supported features are:
Base Fuel Maps
Base Ignition Maps
Fuel corrections and compensations
Ignition corrections and compensations
RPM Limiter
Sensor scalings
and many more maps which need to be identified.
Here is a screenshot of the software:
[attachment=0]Screenshot 2014-04-08 16.10.34.png[/attachment]
"Yamaha Edition"
-
PVTech
- Site Admin
- Posts: 48
- Joined: Wed Feb 13, 2013 7:35 pm
"Yamaha Edition"
You do not have the required permissions to view the files attached to this post.
-
PVTech
- Site Admin
- Posts: 48
- Joined: Wed Feb 13, 2013 7:35 pm
Re: "Yamaha Edition"
After one year of continuous R&D we are glad to announce
that the latest update of the software changes completely the read and reflash procedure.
While the previous versions required to cut open the ECU and solder connectors,
this new version goes in from the main connector without the need to cut the ECU.
More details will be posted soon as the new version comes out.
Regards
that the latest update of the software changes completely the read and reflash procedure.
While the previous versions required to cut open the ECU and solder connectors,
this new version goes in from the main connector without the need to cut the ECU.
More details will be posted soon as the new version comes out.
Regards
-
PVTech
- Site Admin
- Posts: 48
- Joined: Wed Feb 13, 2013 7:35 pm
Re: "Yamaha Edition"
Project Update.
Tests have been carried on Crypton X135, R125, XT660 and Raptor 700.
The results are perfect and soon the updated version of the software will be available.
The read process lasts 10 seconds and the reflash process lasts 30 seconds.
The new interface that is required for the software to work is any J2534 compliant cable.
Tests have been carried on Crypton X135, R125, XT660 and Raptor 700.
The results are perfect and soon the updated version of the software will be available.
The read process lasts 10 seconds and the reflash process lasts 30 seconds.
The new interface that is required for the software to work is any J2534 compliant cable.
-
speednic
- Posts: 1
- Joined: Tue Feb 13, 2018 2:13 am
Re: "Yamaha Edition"
Where do I purchase dealer licenses and hardware?
I contacted you in October last year, but I am waiting for you to answer.
I contacted you in October last year, but I am waiting for you to answer.
-
Leao
- Posts: 2
- Joined: Fri Mar 22, 2019 2:52 am
Re: "Yamaha Edition"
Speednic... me too.
I want buy,, but noboddy anser
I want buy,, but noboddy anser