Kawasaki Zx10R 2007

tipi65
Posts: 19
Joined: Sun Sep 08, 2013 9:29 pm

Kawasaki Zx10R 2007

Post by tipi65 »

21175-0082 US

Ecu pin

+12v = 32,33
GND = 17,34
Flash voltage = 16
K-line = 48
You do not have the required permissions to view the files attached to this post.
amissy
Posts: 30
Joined: Mon Nov 04, 2013 9:50 pm

Re: Kawasaki Zx10R 2007

Post by amissy »

good contribution
tipi65
Posts: 19
Joined: Sun Sep 08, 2013 9:29 pm

Re: Kawasaki Zx10R 2007

Post by tipi65 »

Removed
Last edited by tipi65 on Tue Sep 09, 2014 4:52 pm, edited 1 time in total.
Interceptor
Posts: 38
Joined: Tue Nov 12, 2013 10:31 pm

Re: Kawasaki Zx10R 2007

Post by Interceptor »

Excellent :idea: :idea: :D :D .
Thanks for clearing. Is much easier to create settings in Tuner pro than xml files in Romraider. I have to work with tunerpro ECU marelli ducati and have very easily with my hex editor software. I Can help to discover more settings to other files. My software is free
Interceptor
Posts: 38
Joined: Tue Nov 12, 2013 10:31 pm

Re: Kawasaki Zx10R 2007

Post by Interceptor »

I will now create xdf for suzuki too
Interceptor
Posts: 38
Joined: Tue Nov 12, 2013 10:31 pm

Re: Kawasaki Zx10R 2007

Post by Interceptor »

tipi65, please, what hardware interface you are using to read and write?
Interceptor
Posts: 38
Joined: Tue Nov 12, 2013 10:31 pm

Re: Kawasaki Zx10R 2007

Post by Interceptor »

tipi65 wrote:
> TunerPro Zx10R 2007 US XDF file at your own risk!
>
> TPS-21 division can be wrong?
21 IS CORRECT
tipi65
Posts: 19
Joined: Sun Sep 08, 2013 9:29 pm

Re: Kawasaki Zx10R 2007

Post by tipi65 »

Interceptor wrote:
> tipi65, please, what hardware interface you are using to read and write?


Piasini Serial Suite China clone :D
Interceptor
Posts: 38
Joined: Tue Nov 12, 2013 10:31 pm

Re: Kawasaki Zx10R 2007

Post by Interceptor »

Thank you Tipi65. I purchased one Piasini and arrives tomorrow.
But I'm sure there is a simple, kawasaki only (K-Line) interface. Mitsubishi cars use a simple interface.
16V , K-line conect

For kawasaki files only lacked the limiter RPM / speed

I´m work in the Yamaha xdf
tipi65
Posts: 19
Joined: Sun Sep 08, 2013 9:29 pm

Re: Kawasaki Zx10R 2007

Post by tipi65 »

Interceptor wrote:
> Thank you Tipi65. I purchased one Piasini and arrives tomorrow.
> But I'm sure there is a simple, kawasaki only (K-Line) interface.
> Mitsubishi cars use a simple interface.
> 16V , K-line conect
>
> For kawasaki files only lacked the limiter RPM / speed
>
> I´m work in the Yamaha xdf



Your own risk!
You do not have the required permissions to view the files attached to this post.
amissy
Posts: 30
Joined: Mon Nov 04, 2013 9:50 pm

Re: Kawasaki Zx10R 2007

Post by amissy »

The scheme is easy to do, but what software do you use?
Interceptor
Posts: 38
Joined: Tue Nov 12, 2013 10:31 pm

Re: Kawasaki Zx10R 2007

Post by Interceptor »

Thank you very much Tipi65!
But do the same question amissy....Flash devopment Tool Kit...FTDI?
Interceptor
Posts: 38
Joined: Tue Nov 12, 2013 10:31 pm

Re: Kawasaki Zx10R 2007

Post by Interceptor »

My Piasini Clone not out 16V Flash Voltage...only 11V....sucks even these interfaces low
Interceptor
Posts: 38
Joined: Tue Nov 12, 2013 10:31 pm

Re: Kawasaki Zx10R 2007

Post by Interceptor »

tipi65 wrote:
> TunerPro Zx10R 2007 US XDF file at your own risk!
>
> TPS-21 division can be wrong?

:o Congratulations Tipi65, you found the Exhaust Valve maps that are not yet in...
tipi65
Posts: 19
Joined: Sun Sep 08, 2013 9:29 pm

Re: Kawasaki Zx10R 2007

Post by tipi65 »

Interceptor wrote:
> My Piasini Clone not out 16V Flash Voltage...only 11V....sucks even these
> interfaces low



Some of the Chinese clone are bad, but suffice it to flash voltage is 1-2 volt greater than the power supply
tipi65
Posts: 19
Joined: Sun Sep 08, 2013 9:29 pm

Re: Kawasaki Zx10R 2007

Post by tipi65 »

amissy wrote:
> The scheme is easy to do, but what software do you use?


The connection works at least in... WR ;)
Interceptor
Posts: 38
Joined: Tue Nov 12, 2013 10:31 pm

Re: Kawasaki Zx10R 2007

Post by Interceptor »

The problem is that in wr it only opens files themselves, not a bin file made ​​by Tunerpro. And if you can not load, can not write...
any idea other software only to read and write?
Interceptor
Posts: 38
Joined: Tue Nov 12, 2013 10:31 pm

Re: Kawasaki Zx10R 2007

Post by Interceptor »

Hi Tipi.
I found and added definition of maps for Fuel Trim in xdf files ZX10_07 (0082). Had difficulty in determining the break points TPS correctly, because there are "broken" values ​​(Example 1.2 / 1.8 / 2.4...). see what is correct and please correct whatever is necessary
You do not have the required permissions to view the files attached to this post.
tipi65
Posts: 19
Joined: Sun Sep 08, 2013 9:29 pm

Re: Kawasaki Zx10R 2007

Post by tipi65 »

Interceptor wrote:
> Hi Tipi.
> I found and added definition of maps for Fuel Trim in xdf files ZX10_07
> (0082). Had difficulty in determining the break points TPS correctly,
> because there are "broken" values ​​(Example 1.2 / 1.8 / 2.4...).
> see what is correct and please correct whatever is necessary



Eli around, go for it .. etc..
You do not have the required permissions to view the files attached to this post.
Interceptor
Posts: 38
Joined: Tue Nov 12, 2013 10:31 pm

Re: Kawasaki Zx10R 2007

Post by Interceptor »

Hi Tipi, please what your e-mail?
Post Reply