Kawasaki Zx10R 2007
-
- Posts: 19
- Joined: Sun Sep 08, 2013 9:29 pm
Kawasaki Zx10R 2007
21175-0082 US
Ecu pin
+12v = 32,33
GND = 17,34
Flash voltage = 16
K-line = 48
Ecu pin
+12v = 32,33
GND = 17,34
Flash voltage = 16
K-line = 48
You do not have the required permissions to view the files attached to this post.
-
- Posts: 19
- Joined: Sun Sep 08, 2013 9:29 pm
Re: Kawasaki Zx10R 2007
Removed
Last edited by tipi65 on Tue Sep 09, 2014 4:52 pm, edited 1 time in total.
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Zx10R 2007
Excellent .
Thanks for clearing. Is much easier to create settings in Tuner pro than xml files in Romraider. I have to work with tunerpro ECU marelli ducati and have very easily with my hex editor software. I Can help to discover more settings to other files. My software is free
Thanks for clearing. Is much easier to create settings in Tuner pro than xml files in Romraider. I have to work with tunerpro ECU marelli ducati and have very easily with my hex editor software. I Can help to discover more settings to other files. My software is free
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Zx10R 2007
I will now create xdf for suzuki too
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Zx10R 2007
tipi65, please, what hardware interface you are using to read and write?
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Zx10R 2007
tipi65 wrote:
> TunerPro Zx10R 2007 US XDF file at your own risk!
>
> TPS-21 division can be wrong?
21 IS CORRECT
> TunerPro Zx10R 2007 US XDF file at your own risk!
>
> TPS-21 division can be wrong?
21 IS CORRECT
-
- Posts: 19
- Joined: Sun Sep 08, 2013 9:29 pm
Re: Kawasaki Zx10R 2007
Interceptor wrote:
> tipi65, please, what hardware interface you are using to read and write?
Piasini Serial Suite China clone
> tipi65, please, what hardware interface you are using to read and write?
Piasini Serial Suite China clone
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Zx10R 2007
Thank you Tipi65. I purchased one Piasini and arrives tomorrow.
But I'm sure there is a simple, kawasaki only (K-Line) interface. Mitsubishi cars use a simple interface.
16V , K-line conect
For kawasaki files only lacked the limiter RPM / speed
I´m work in the Yamaha xdf
But I'm sure there is a simple, kawasaki only (K-Line) interface. Mitsubishi cars use a simple interface.
16V , K-line conect
For kawasaki files only lacked the limiter RPM / speed
I´m work in the Yamaha xdf
-
- Posts: 19
- Joined: Sun Sep 08, 2013 9:29 pm
Re: Kawasaki Zx10R 2007
Interceptor wrote:
> Thank you Tipi65. I purchased one Piasini and arrives tomorrow.
> But I'm sure there is a simple, kawasaki only (K-Line) interface.
> Mitsubishi cars use a simple interface.
> 16V , K-line conect
>
> For kawasaki files only lacked the limiter RPM / speed
>
> I´m work in the Yamaha xdf
Your own risk!
> Thank you Tipi65. I purchased one Piasini and arrives tomorrow.
> But I'm sure there is a simple, kawasaki only (K-Line) interface.
> Mitsubishi cars use a simple interface.
> 16V , K-line conect
>
> For kawasaki files only lacked the limiter RPM / speed
>
> I´m work in the Yamaha xdf
Your own risk!
You do not have the required permissions to view the files attached to this post.
-
- Posts: 30
- Joined: Mon Nov 04, 2013 9:50 pm
Re: Kawasaki Zx10R 2007
The scheme is easy to do, but what software do you use?
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Zx10R 2007
Thank you very much Tipi65!
But do the same question amissy....Flash devopment Tool Kit...FTDI?
But do the same question amissy....Flash devopment Tool Kit...FTDI?
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Zx10R 2007
My Piasini Clone not out 16V Flash Voltage...only 11V....sucks even these interfaces low
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Zx10R 2007
tipi65 wrote:
> TunerPro Zx10R 2007 US XDF file at your own risk!
>
> TPS-21 division can be wrong?
Congratulations Tipi65, you found the Exhaust Valve maps that are not yet in...
> TunerPro Zx10R 2007 US XDF file at your own risk!
>
> TPS-21 division can be wrong?
Congratulations Tipi65, you found the Exhaust Valve maps that are not yet in...
-
- Posts: 19
- Joined: Sun Sep 08, 2013 9:29 pm
Re: Kawasaki Zx10R 2007
Interceptor wrote:
> My Piasini Clone not out 16V Flash Voltage...only 11V....sucks even these
> interfaces low
Some of the Chinese clone are bad, but suffice it to flash voltage is 1-2 volt greater than the power supply
> My Piasini Clone not out 16V Flash Voltage...only 11V....sucks even these
> interfaces low
Some of the Chinese clone are bad, but suffice it to flash voltage is 1-2 volt greater than the power supply
-
- Posts: 19
- Joined: Sun Sep 08, 2013 9:29 pm
Re: Kawasaki Zx10R 2007
amissy wrote:
> The scheme is easy to do, but what software do you use?
The connection works at least in... WR
> The scheme is easy to do, but what software do you use?
The connection works at least in... WR
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Zx10R 2007
The problem is that in wr it only opens files themselves, not a bin file made by Tunerpro. And if you can not load, can not write...
any idea other software only to read and write?
any idea other software only to read and write?
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Zx10R 2007
Hi Tipi.
I found and added definition of maps for Fuel Trim in xdf files ZX10_07 (0082). Had difficulty in determining the break points TPS correctly, because there are "broken" values (Example 1.2 / 1.8 / 2.4...). see what is correct and please correct whatever is necessary
I found and added definition of maps for Fuel Trim in xdf files ZX10_07 (0082). Had difficulty in determining the break points TPS correctly, because there are "broken" values (Example 1.2 / 1.8 / 2.4...). see what is correct and please correct whatever is necessary
You do not have the required permissions to view the files attached to this post.
-
- Posts: 19
- Joined: Sun Sep 08, 2013 9:29 pm
Re: Kawasaki Zx10R 2007
Interceptor wrote:
> Hi Tipi.
> I found and added definition of maps for Fuel Trim in xdf files ZX10_07
> (0082). Had difficulty in determining the break points TPS correctly,
> because there are "broken" values (Example 1.2 / 1.8 / 2.4...).
> see what is correct and please correct whatever is necessary
Eli around, go for it .. etc..
> Hi Tipi.
> I found and added definition of maps for Fuel Trim in xdf files ZX10_07
> (0082). Had difficulty in determining the break points TPS correctly,
> because there are "broken" values (Example 1.2 / 1.8 / 2.4...).
> see what is correct and please correct whatever is necessary
Eli around, go for it .. etc..
You do not have the required permissions to view the files attached to this post.
-
- Posts: 38
- Joined: Tue Nov 12, 2013 10:31 pm
Re: Kawasaki Zx10R 2007
Hi Tipi, please what your e-mail?